UnblockHub VPN Setup Guide.

Get unlimited access on all of our supported platforms. UnblockHub allows you to protect all of your personal devices at the same time without any bandwidth limitation.

  • 1.Go to "Settings" and then go to "General".
  • 2.Then proceed to "VPN". You may need to scroll down to find it.
  • 3.Tap on "Add VPN Configuration" and then tap on "Type". Select "L2TP""SSTP" or "PPTP" by tapping on it.
  • 4.In the "Description" field you can put any name like "Unblockhub".
  • 5.Then enter the server address and your VPN account Username and Password in the related fields.
  • 6. In the "Secret" field enter the Pre-Shared key that you have received with your VPN account details email when you have placed your order with us.
  • 7."Send All Traffic" should be "ON".
  • 8.When the fields are filled up correctly, tap "Done".
  • 9.Now connect by tapping the switch button to the right of VPN Status.

  • 1. Go to "System".
  • 2.Go to "Preferences" and then "Network Connections".
  • 3.Select "VPN" tab and click "Add".
  • 4.Select "Point-to-Point Tunneling Protocol (PPTP)" and click on the "Create" button.
  • 5.Enter any name like "Unblockhub" as "Connection name".
  • 6. Enter the server address in the "Gateway" field.
  • 7. Enter your VPN account username and password in the "User name" and "Password" fields.
  • 8.Click on the "Advanced" button.
  • 9.Check "Use Point-to-Point encryption (MPPE)" option.
  • 10.Click "OK" and then "Apply" button and then "Close".
  • 11.Click on the network manager icon on your desktop bar notification area. This icon can be in the shape of two computer screens or arrows or a signal meter if its a Wi-Fi connection that you use.
  • 12.Select "VPN Connections" and choose the VPN connection that you have created. Once VPN is connected, you will see the lock icon on the top bar.

  • 1.Click on the networking icon located in the menu bar (top of the screen). The icon can be in a shape of the Ethernet port (if you use wired connection) or a Wi-Fi signal meter (if you use wireless connection).
  • 2.In the dropdown menu click on the main connection and choose its "Settings".
  • 3. In the "Network" settings window click on "+" button to add the connection.
  • 4.In the appeared window select "VPN".
  • 5.Then you need to select the VPN type, choose "Point-to-Point Tunneling Protocol (PPTP)".
  • 6.Enter any name like "UnblockHub" as "Name" and enter the server address in "Gateway" field. Then enter your VPN account username and password and click "Advanced...".
  • 7.Check "Use Point-to-Point encryption (MPPE)" box and click "OK". Then click "Add".
  • 8.Now you can see the VPN in the connection list left hand side of the "Network" settings window.
  • 9.To connect the VPN click on the networking icon at top of the screen and select the VPN connection and click "Connect".

  • 1.Click on profile icon from your desktop and select "Settings".
  • 2.Then click "Add connection" and then "Add private network".
  • 3.Please fill the following fields: .
  • Server hostname: (Enter the server address)
  • Service name: (Enter any name like Unblockhub)
  • Provider type: L2TP/IPsec + pre-shared key
  • Pre-shared key: (Enter the Pre-Shared Key)
  • Username: (Your VPN account username)
  • Password: (Your VPN account password)
  • 4.Check "Save identity and password" option and click Connect.

Powered by WHMCompleteSolution

Copyright © 2019 Unblockhub. All Rights Reserved.